Contact us
DISCOUNTED
Rundsnor PU 75 A Plus orange mat

Description

V-belt PU 90A White smooth with polyester reinforcement 

White PU V-belt from BEHAbelt 92° ShA, is made of a slightly elastic material PU 90A and is particularly suitable for conveyor systems and roller conveyors and for vertical shafts.

 

Item no. Type Dimensions Weight Roll length Min. pulley Ø Max load
(Standard)
Max load
(Overlap)
 
 
 
kg/100m
 
etc
kg
kg
FBZKP90A08P PU 90A 8 x 5 (M) mm 4,0 100 meters 65 15,4 30,0
FBZKP90A10P PU 90A 10 x 6 (Z) mm 6,0 50 meters 85 23,0 45,0
FBZKP90A13P PU 90A  13 x 8 (A) mm 10,0 50 meters 110 38,4 67,5
FBZKP90A17P PU 90A 17 x 11 (W) mm 18,0 50 meters 150 69,1 120,0
FBZKP90A22P PU 90A 22 x 14 (C) mm 29,0 50 meters 210 115,20 202,50

Recommended preload 0,5 to 2% | Coeff. of friction µ: Steel: approx. 0.50 | PE: approx. 0.30 | HDPE: approx. 0.25

Weldable V-belts made of PU and TPE are available in various hardnesses and profiles for transport and
power transmission applications. Many of our PU V-belts are food-approved and have special properties for particularly demanding applications.

Typical industries are: Food, logistics, printing & paper, packaging, building materials and much more.


Essential characteristics:

  • Medium soft belt material
  • Slightly elastic
  • Light friction
  • Very flexible at low temperatures
  • Available in reinforced type
  • PU 90 A = (Approx. 92° Shore A)
  • Color: White smooth
Rundremme & rundsnor

Find more information about our round belts here:


BEHAbelt - Produkt katalog 2021/2022 - Rundremme & PU kileremme

Video

Splice

Image

Pruning 
The ends of the V-belt are cut at a 90 degree angle using BEHAbelt 's angle pliers AS02. 

Image

Step 2. get std loan 
The clamps, e.g. FZ01 Vario or FZ02, are mounted on the ends of round belts to ensure correct fixation during welding. 

Image

Step 3. welding 
The ends are welded together, e.g. using. BEHAbelt 's EErgo paddle welding tool or BEHAbelt 's Multi TC welding tool. TPE profiles are welded at a temperature of 240°C and PU profiles are welded at a temperature of 290°C. Clamps can be removed when the material has cooled down.

Image

Step 4. cooling 
After the ends of round belts have been fused together and the material has cooled down, remove any bead at the splice, using BEHAbelt SE02 edge cutter or sharp knife. The expected cooling time is about 5-10 minutes. Shorten any cooling time by placing the belt under cold water.    

 

Back to: PU -belt

Recently Viewed Products