PU Round Belt PU 90A White Smooth Polyester Reinforcement

Pruning 
The ends of the V-belt are cut at a 90 degree angle using BEHAbelt 's angle pliers AS02. 

Step 2. get std loan 
The clamps, e.g. FZ01 Vario or FZ02, are mounted on the ends of round belts to ensure correct fixation during welding. 

Step 3. welding 
The ends are welded together, e.g. using. BEHAbelt 's EErgo paddle welding tool or BEHAbelt 's Multi TC welding tool. TPE profiles are welded at a temperature of 240°C and PU profiles are welded at a temperature of 290°C. Clamps can be removed when the material has cooled down.

Step 4. cooling 
After the ends of round belts have been fused together and the material has cooled down, remove any bead at the splice, using BEHAbelt SE02 edge cutter or sharp knife. The expected cooling time is about 5-10 minutes. Shorten any cooling time by placing the belt under cold water.