Timing belt CXP 945 3M - CONTI® SYNCHROFORCE

Timing belt CXP 945 3M - CONTI® SYNCHROFORCE

Timing belt CXP 945 3M - CONTI® SYNCHROFORCE is an endless rubber timing belt for synchronous power transmission in industrial belt drives. The profile is HTD 3M CXP, the length is 945 mm, and the belt has 315 teeth. The teeth work in mesh with the timing belt pulley and maintain a fixed movement between the shafts.

Product data

• Effective length: 945 mm
• Number of teeth: 315
• Tooth profile: HTD 3M CXP
• Tooth pitch: 3 mm
• Profile type: HTD 3M in CXP version
• Tooth height: 1.2 mm
• Belt height: 2.4 mm
• Standard widths: 6 mm, 9 mm and 15 mm
• Length tolerance: ±0.33 mm
• Material: Chloroprene rubber
• Reinforcement: Fiberglass reinforcement
• Tooth surface: Prepared polyamide tissue on the tooth side
• Series: CONTI® SYNCHROFORCE CXP

Construction and materials

The CXP series is distinguished by incorporating a strong fiberglass reinforcement into a chloroprene-based belt. The tooth surface is covered with a specially treated polyamide fabric, which reduces friction in the tooth engagement and protects the tooth during operation. The back and teeth are made of chloroprene-based rubber, while the fiberglass reinforcement is located as the load-bearing reinforcement in the belt. This results in a belt that can absorb tensile forces and still maintain synchronous function, while the rubber part can bend around the timing belt pulleys during repeated rotations.

The polyamide fabric on the teeth is an important part of the belt's wear surface. It lies between the tooth rubber and the profile of the timing belt pulley and contributes to lower friction, smoother engagement and better protection of the tooth surface. In a CXP belt, the material layers are not separate functions, but parts of an overall construction where flexibility, tensile strength and tooth stability must work simultaneously.

Profile and tooth engagement

CXP 3M uses a metric tooth pitch of 3 mm. The HTD tooth shape has a semi-circular profile, which provides a large and stable engagement surface between the belt and the timing belt pulley. This shape is known for its high safety against tooth skipping, because the tooth can engage deeply and smoothly into the profile of the timing belt pulley. For this belt, the 945 mm effective length means that the belt has 315 teeth distributed around the endless belt.

Fine tooth pitch makes the profile suitable for small timing belt pulleys and precise movements where the belt must run smoothly at high rotational speeds. The profile is also part of the CXP series, where ContiTech has combined tooth shape, reinforcement and rubber compound for operation under demanding loads. The technical length tolerance for this length class is ±0.33 mm. The tolerance covers the manufacturer's effective length and pulleybase deviation.

Operating characteristics

CONTI® SYNCHROFORCE CXP is designed for high belt speeds and high dynamic loads and can be used at belt speeds of up to 50 m/s. The high load capacity is due, among other things, to the specially developed reinforcement and the strong material bond between rubber, reinforcement and tooth surface. This gives the belt high residual tensile strength and improved resistance to tooth shearing under heavy loads.

The belt transmits motion synchronously, so that the driving and driven shafts maintain a fixed speed ratio. It works without lubrication and is designed for maintenance-free operation. The optimized profile matching between the timing belt and timing belt pulley, together with the polyamide fabric on the tooth side, contributes to quiet operation. In demanding operation, this is an important property, because both tooth engagement and load variation can affect the sound level and stability.

Resistance to operating environment

The CXP version is temperature resistant from -20 °C to +100 °C depending on the application. The belt is ozone resistant, suitable for tropical climates, conditionally/moderately oil resistant and electrically conductive according to ISO 9563. These properties make the belt suitable for industrial environments where temperature, air, oily influences and static electricity can affect operation.

The rubber-based construction also provides some damping in the drive. The timing belt can therefore be used in solutions where a quieter and lighter transmission is desired than chain or sprocket drives. The function of the belt still depends on the mechanical structure around it, but the CXP construction itself is made to maintain strength and flexibility under repeated loads.

Application

In operation, the belt can be used in machinery where rotating movements must be transmitted with a fixed ratio between shafts. The synchronous function makes the belt type suitable for machines where the speed ratio must be stable over time. Compact synchronous drives, instrumentation, lightweight machine structures and other installations with limited space around the timing belt pulleys. It can be used in industrial systems where synchronous operation, high efficiency and stable power transmission without lubrication are required. The CXP series is particularly relevant in fast-running drives where a standard timing belt does not provide the same load reserve.

The effective length of 945 mm and the CXP 3M profile make this belt a specific dimension in the series. The belt fits into timing belt pulleys with a corresponding tooth pitch and tooth shape. When timing belt pulleys and belt have the same tooth profile, the load is distributed over the teeth that work in mesh and the movement is transmitted without the slip known from friction-based belt types.

Installation and ongoing operation

In a synchronous belt drive, belt tension, the condition of the timing belt pulleys and the parallelism of the shafts are important for the life of the belt. A CXP belt works best when the tooth surfaces can move cleanly in and out of the profile of the timing belt pulleys. Too low a tension can cause unstable tooth engagement, while unnecessarily high tension can increase the load on bearings, shafts and reinforcement. A correctly constructed transmission utilizes the strength of the belt without overloading its materials.

The belt is endless without joints. This provides a uniform structure all the way around and is an advantage in dynamic operation because the belt does not have a weaker joint pu . The same construction makes the belt suitable for repeated accelerations, uniform rotational speed and operation with continuous tooth engagement.

Question about the belt

Can CXP run without lubrication?

Yes. SYNCHROFORCE CXP is a timing belt for dry, synchronous power transmission and does not require lubrication. This distinguishes it from chain drives, where lubrication is typically part of the operation.

What does an HTD tooth shape mean?

HTD stands for High Torque Drive. The semi-circular tooth shape provides good protection against tooth skipping and is suitable for power transmission with high torque.

What does tooth division mean?

The tooth pitch is the center-to-center distance between two adjacent teeth measured along the belt's pitch line. A 3M belt has a 3 mm tooth pitch.

What does CXP mean on this timing belt?

CXP is ContiTech's reinforced version for belt drives with high belt speeds and high dynamic loads. The series is designed for the synchronous transmission of power and motion in industrial drives.

What does the fiberglass reinforcement in the belt do?

The fiberglass reinforcement acts as reinforcement and helps the belt maintain its length under load. This is important in synchronous belt drives, where tooth position and the effective length of the belt have a direct impact on operation.

Backflex and the use of a tension roller can be included in certain CXP designs when the belt drive is dimensioned for it. The flexibility of the belt and rubber-based construction make it suitable for dynamic grooves, but the bend radius, roller size and belt tension always have an impact on the load in the reinforcement and the tooth root.

The CXP design is particularly relevant when the belt is to operate at high belt speeds. The CXP series can operate at belt speeds of up to 50 m/s and is therefore one of the reinforced timing belts for dynamic drives. This does not mean that all belt drives can automatically operate at this speed; the actual operation depends on the timing belt pulleys, center distance, load, width, shaft alignment and the machine structure. However, the belt type itself has been developed with materials and tooth structure that are suitable for this type of load.

The dimensions of the profile affect how the belt bends and how the tooth carries the load in the timing belt pulley. For 3M, the tooth pitch is 3 mm, the tooth height is 1.2 mm, and the total belt height is 2.4 mm. These measurements describe the profile itself and are not the same as the belt width, which depends on the individual belt variant.

The technical length tolerance for this length class is ±0.33 mm. The tolerance describes the manufacturer's level of precision for the belt's effective length and is used when assessing the center distance and belt tension in a synchronous drive. A timing belt of this type is therefore not only defined by its name and profile, but also by the exact length class and the tolerances associated with it.

The effective length is the pitch length of the belt and the length value used to identify the timing belt. The number of teeth follows from the length and the pitch. For this belt, 945 mm length and 3 mm pitch give 315 teeth. This relationship is important because the number of teeth determines how the belt fits in relation to the number of teeth on the timing belt pulleys and the center distance in the drive.