Double timing belt 950 DH - MEGASYNC™ Imperial DD

Double timing belt 950 DH - MEGASYNC™ Imperial DD - Effective length: 2413 mm - Number of teeth: 190

MEGASYNC™ Imperial DD timing belt in Profile "DH" is available in the following sizestooth widths: 6.35mm (025"), 7.94mm (031"), 9.53mm (037"), 12.7mm (050"), 19.05mm (075") 25.4mm (0100")

MEGASYNC™ Imperial DD rubber double timing belts have fiberglass reinforcement and are provided with nylon fabric on the tooth side. The belt is endless without joints. The standard DH profile is a timing belt with inch tooth pitch and trapezoidal teeth. Timing belts are today an important part of many machines and are primarily used for power transmission or transport. A timing belt can best be described as a belt with integrated molded teeth on the inside, which secures the position of the timing belt in the timing belt pulley. By using a double timing belt with DH profile, you can build a belt drive with synchronous properties with great precision.

• High efficiency due to positive engagement between the timing belt and the timing belt pulley.
• The fiberglass reinforcement provides excellent tensile strength, flexibility and high resistance to elongation.
• High precision in your belt drive.
• Improved stress distribution
• Temperature range: -25°C to +100°C
  
  

The standard timing belts are produced in accordance with applicable DIN and ISO standards.
All DH timing belts meet 'REACH Directive.

Important: These timing belts are cut to width to order and cannot be returned

Example of timing belt: 950-DH-075

075 = "3/4" = Width in inches. 
DH "1/2" = Type/Tooth distance in mm.
2413 = Effective length [mm]
"18.5" = Length [inch]

Also known by other brands:

OPTIBELT ® ZR DH
GATES ® POWERGRIP CTB DH ® 
CONTITECH ® CONTI DH
BANDO ® DH