Double timing belt 172 DXL - MEGASYNC™ Imperial DD

Double timing belt 172 DXL - MEGASYNC™ Imperial DD - Effective length: 436.88 mm - Number of teeth: 86

MEGASYNC™ Imperial DD timing belt in Profile " DXL " is available in the following sizestooth widths: 6.35mm (025"), 7.94mm (031"), 9.53mm (037"), 12.7mm (050"), 19.05mm (075")

MEGASYNC™ Imperial DD rubber double timing belts have fiberglass reinforcement and are born with nylon fabric on the tooth side. The belt is endless without joints. Standard DXL profile - is a timing belt with an inch tooth pitch and trapezoidal teeth. Timing belts are nowadays an important part of many machines, timing belts are primarily used for power transmission or transport. A A timing belt can best be described as a belt with integrally molded teeth on the inside, which secures the position of the timing belt in the timing pulley. By using a double timing belt with DXL profile, you can build a belt drive with synchronous properties with great precision.

• High efficiency due to positive engagement between the timing belt and the timing belt pulley.
• The fiberglass reinforcement provides excellent tensile strength, flexibility and high resistance to elongation.
• High precision in your belt drive.
• Improved stress distribution
• Temperature range: -25°C to +100°C
  
  

The standard timing belts are produced in accordance with applicable DIN and ISO standards.
All DXL timing belts meet 'REACH Directive.

Important: These timing belts are cut to width to order and cannot be returned

Example of timing belt: 172- DXL -050

050 = "1/2" = Width in inches. 
DXL "1/5" = Type/Tooth spacing in mm.
436.88 = Effective length [mm]
"12" = Length [inch]

Also known by other brands:

OPTIBELT ® ZR DXL
GATES ® POWERGRIP CTB DXL ® 
CONTITECH ® CONTI DXL