TIMING BELT 350 H - Bando

Bando 350-H Timing belt - Type: H - Effective length: 889mm - Number of teeth: 70

Bando timing belt in Profile "H" is available in the following sizesstandard width: 19.05mm (075"), 25.4mm (100"), 38,1mm (150"), 50.8mm (200") 76.2mm (300").

Can be purchased in other widths upon request +45 48248545 or info@fecconsult.dk

Bando rubber timing belts have fiberglass reinforcement and are born with nylon fabric on the tooth side. The belt is endless without joints. Standard H-profile - is a timing belt with inch tooth pitch and trapezoidal teeth. Timing belts are nowadays an important part of many machines, timing belts are primarily used for power transmission or transport. A timing belt can best be described as a belt with integrally molded teeth on the inside, which ensures the position of the timing belt in the timing belt pulley. By using a timing belt with H-profile, you can build a belt drive with synchronous properties with great precision.

• High efficiency due to positive engagement between the timing belt and the timing belt pulley.
• The fiberglass reinforcement provides excellent tensile strength, flexibility and high resistance to elongation.
• High precision in your belt drive.
• Improved stress distribution
• Temperature -25°C to +100°C
  
  

The standard timing belts are manufactured in accordance with applicable DIN and ISO standards. All PIX H timing belts comply with 'REACH Directive.

Important: These timing belts are cut to width to order and cannot be returned

Example of timing belt: 350-H-100

100 = "1" = Width in inches.
H "½" = Type/Tooth spacing in mm.
889 = Effective length [mm]
"35" = Length [inch]

Also known by other brands:

OPTIBELT ZR ® 350-H-200
MEGADYNE ISORAN ® 350-H-150
GATES ® POWERGRIP CTB 350-H-100
CONTITECH ® CONTI SYNCHRO BELT 350-H-075
PIX X'act ® CT - H SECTION 350-L-050