Timing belt 232 L - ConCar

ConCar 232-L X'act® CT timing belt - Effective length: 589.28mm - Number of teeth: 62

ConCar timing belt in Profile "L" is available in the following sizes:Standard width: 12.7mm (050"), 19.05mm (075"), 25.4mm (100"), 38,1mm (150"), 50.8mm (200")

Can be purchased in other widths upon request +45 48248545 or info@fecconsult.dk

ConCar rubber timing belts have fiberglass reinforcement and are born with nylon fabric on the tooth side. The belt is endless without joints. Standard L-profile - is a timing belt with inch tooth pitch and trapezoidal teeth. Timing belts are nowadays an important part of many machines, timing belts are primarily used for power transmission or transport. A A timing belt can best be described as a belt with integrally molded teeth on the inside, which secures the position of the timing belt in the timing pulley. By using a timing belt with an L-profile, you can build a belt drive with synchronous properties with great precision.

• High efficiency due to positive engagement between the timing belt and the timing belt pulley.
• The fiberglass reinforcement provides excellent tensile strength, flexibility and high resistance to elongation.
• High precision in your belt drive.
• Improved stress distribution
• Temperature range: -25°C to +100°C
  
  

The standard timing belts are produced in accordance with applicable DIN and ISO standards.
All ConCar L timing belts meet 'REACH Directive.

Important: These timing belts are cut to width to order and cannot be returned 

Example of timing belt: 232-L-100

100 = "1" = Width in inches.
L "3/8" = Type/Tooth distance in mm.
589.28 = Effective length [mm]
"23.2" = Length [inch]

Also known by other brands:

OPTIBELT ZR ®
MEGADYNE ISORAN ®
GATES ® POWERGRIP CTB
CONTITECH ® CONTI SYNCHRO BELT
PIX X'act ® CT - L SECTION