Double timing belt RPP14 DD 1400

Megadyne MEGASYNC 1400 RPP 14M DD double-timing rubber timing belt

Important product details

• Effective length: 1400 mm
• Number of teeth: 100
• Tooth profile: RPP 14M DD
• Tooth pitch: 14.0 mm
• Design: Double-timing
• Material: Rubber
• Traction body: Fiberglass
• Tooth coating: Nylon fabric
• Tooth height: 5.70 mm
• Belt height: 14.80 mm
• Standard widths: 40 mm, 55 mm, 85 mm, 115 mm and 170 mm
• Brand: Megadyne MEGASYNC

Megadyne MEGASYNC 1400 RPP 14M DD double-timing rubber timing belt is an endless rubber timing belt from Megadyne's MEGASYNC series. The product has a pitch length of 1400 mm, 100 teeth, RPP 14M DD profile and standard widths of 40mm, 55mm, 85mm, 115mm and 170mm. The product belongs to Megadyne's MEGASYNC series of endless rubber timing belts, where the construction is developed for operationally stable belt drives with low maintenance requirements. The belt is manufactured for synchronous drives, where the movement must be transferred smoothly between pulleys without slipping. The fixed tooth pitch and the endless structure provide a uniform rotation, while the RPP profile contributes to lower noise and better engagement in the profile pulleys.

Product data and profile

The stated length of 1400 mm is the belt's pitch length, i.e. the length measured along the theoretical pitch line in the tension layer. RPP 14M DD has a tooth pitch of 14.0 mm, and this variant has 100 teeth. The profile is a double-timing RPP profile with a 14 mm tooth pitch, and the overall design is intended for large double-timing drives, where the belt can work with power transmission from both tooth sides. The tooth height of the profile is 5.70 mm, while the nominal belt height for this design is 14.80 mm. The widths in this item follow the registered standard widths for the product: 40mm, 55mm, 85mm, 115mm and 170mm. With this length, the belt fits many common industrial belt drives, where there is a balanced distance between the belt pulleys and space for a stable enclosure. The 100 teeth provide an even tooth pattern around the belt and a stable distribution of engagement in the pulleys.

Construction and materials

The MEGASYNC RPP belt is built around a rubber body with high fatigue resistance, good resistance to heat and environmental influences and wear resistance in daily operation. The traction member is fiberglass, which is embedded in the belt and is selected for high tensile strength, stable length and good adhesion to the rubber body. The tooth side is covered with nylon fabric. The nylon fabric acts as a wear-resistant contact surface against the pulley and is treated to reduce friction in the engagement. The combination of rubber, fiberglass and nylon results in a belt that can operate reliably in synchronous drives without continuous lubrication.

The double-timing DD design has teeth on both sides of the belt. This makes the belt suitable for constructions where the belt not only works against pulleys on the inside, but can also be part of a belt guide with external tooth engagement. This construction is typically used when several shafts need to be synchronized in the same belt drive, or when a compact belt guide requires that the force can be transferred from both sides of the belt. The DD design does not change the principle behind the RPP profile: the tooth shape is still parabolic, and the aim is still smooth engagement, lower noise and good resistance to tooth skipping. On a double-timing belt, the total belt height is greater than on a corresponding single-timing version, because there is a tooth profile on both sides of the belt. The belt is endless without a joint in the traction layer, which gives a uniform construction all the way around. This is important in rotating drives, where the same area of ​​the belt repeatedly passes in and out of the tooth grooves of the pulleys. The uniform construction helps maintain smooth running, fixed tooth pitch and stable load distribution during operation.

RPP tooth shape and tooth engagement

The RPP profile is developed as a parabolic tooth shape with a progressive pressure angle from the tooth root up to the tooth tip. This design gives a taller tooth at the same pitch length and reduces interference between the belt and pulley, especially when the drive is subjected to torque peaks. The tooth shape improves resistance to tooth skipping and tooth cutting, while also being able to transmit higher torque with less preload than older or simpler tooth profiles. There is a groove on the tooth tip, which makes the engagement more elastic. The groove helps the tooth to settle more evenly in the pulley groove and distributes the load more evenly between the teeth working simultaneously.

The RPP14 profile is the coarse and heavy-duty part of the RPP series. The tooth pitch and tooth height make it suitable for heavy-duty belt drives where the belt must transmit greater forces with stable engagement. Megadyne's RPP profile is designed to work in existing deep profile pulleys according to ISO 13050. This provides a high degree of compatibility in drives where the profile pulleys already follow this type of geometry. The positive tooth contact makes the belt suitable for precise synchronization, because the speed follows the number of teeth of the pulleys and does not depend on friction alone. In correctly dimensioned drives, MEGASYNC rubber timing belts can work at linear speeds of up to 30 m/s, making the series suitable for both slower power transmission and faster machine movements.

Operating characteristics

The technical strength of the RPP 14M DD lies in the combination of precise tooth pitch, low noise level and high efficiency. The belt operates without the need for external lubrication, and the treated nylon surface of the teeth contributes to a lower level of friction in the contact zone. This makes the belt drive cleaner than chain drives and at the same time reduces maintenance. The synchronous movement means that the drive can maintain a constant angular velocity between the shafts when the pulley and belt are correctly designed as a system. The RPP tooth shape also helps to handle load peaks because the tooth engagement occurs gradually and not as a hard edge engagement.

The design is suitable for both continuous rotation and repeated start/stop movements, provided that the belt drive is dimensioned according to load, speed and pulley geometry. Heavy machinery, longer belt runs and applications with large pulleys are typical examples of operation where the smooth meshing and good resistance to tooth skipping of the RPP profile are of practical importance. The standard version of the belt has medium resistance to water, grease and common environmental influences, low resistance to oil and mineral oil and no real resistance to acids, bases, solvents or fuels. The normal temperature range is -25 °C to +80 °C, with short-term peak loads up to +100 °C. The hardness of standard RPP belts is 74 ±4 ShA.

Installation and maintenance

An RPP timing belt works best when the pulleys, center distance and belt tension match the load in the drive. Too low a belt tension can lead to the risk of tooth skipping during torque peaks, while too high a tension can increase noise, heat generation and load on bearings. The ability of the RPP profile to work with lower preload is an advantage because it can reduce mechanical stress in the drive. The condition of the pulleys also has an impact on the service life. Worn or rough tooth grooves can increase friction and wear the nylon fabric faster, while correct alignment between the shafts provides a more uniform load across the width of the belt. The endless construction usually does not require any post-treatment of the belt itself during operation.

Technical questions about RPP 14M DD

What does the fiberglass reinforcement do?

The fiberglass tensioner serves as the belt's load-bearing tension member. It is selected for its high tensile strength, good resistance to repeated loads and very low length change over time. This part of the construction is important for maintaining stable tooth pitch during operation.

Is the belt suitable for operation without lubrication?

Yes, the synchronous rubber timing belt operates without external lubrication. The power is transmitted through the tooth meshing, and the treated nylon surface of the teeth helps reduce friction in contact with the pulley. This provides a cleaner and more maintenance-friendly solution than many chain drives.

How does voltage affect operation?

A correctly tensioned synchronous belt provides secure tooth engagement and stable power transmission. Too low a tension can increase the risk of tooth skipping at load peaks, while too high a tension can cause unnecessary noise, heat and bearing stress. The RPP profile is designed to work with less preload than older profile types in comparable drives.

What operating environments is RPP rubber suitable for?

The standard version has medium resistance to water, grease and general environmental influences and low resistance to mineral oil and grease. It is not intended as a chemical resistant belt against acids, bases, solvents or fuels. The temperature range is from -25 °C to +80 °C with short-term peak loads up to +100 °C.

Overall rating of the product

The Megadyne MEGASYNC 1400 RPP 14M DD double-timing rubber timing belt combines the key features of a modern RPP rubber timing belt: endless construction, fiberglass traction, nylon weave on the teeth, parabolic profile and synchronous power transmission without lubrication. The product's length of 1400 mm and 100 teeth make it a specific variant in the MEGASYNC program, while the RPP 14M DD profile indicates the tooth pitch and profile geometry. This makes the belt a technically strong solution in synchronous drives, where stability, low noise level and correct tooth engagement have a direct impact on the operation of the machine.