Megadyne timing belt 1120 SLV8 - Megasync Silver3

Megadyne Isoran RPP Silver® 1120-SLV8 - Effective length: 1120 mm - Number of teeth: 140

Profile: SLV8 is available in the following standard widths: 20mm, 30mm, 50mm and 85mm. Can be purchased in other widths on request.

Megadyne Isoran® RPP Silver rubber timing belts have fiberglass reinforcement and are born with nylon fabric on the tooth side. The belt is endless without joints. Standard SLV8 profile - is a timing belt with millimeter tooth pitch and cup-shaped teeth. Timing belts are nowadays an important part of many machines, timing belts are primarily used for power transmission. A timing belt can best be described as a belt with integrally molded teeth on the inside, which ensures the position of the timing belt in the timing belt pulley. By using a timing belt with SLV8 profile, you can build a belt drive with synchronous properties with great precision. Megadyne Isoran RPP Silver is a timing belt with reinforced properties, which ensures the timing belt has a higher tensile strength approx. 100% more than a standard HTD or RPP timing belt.

• High efficiency due to positive engagement between the timing belt and the timing belt pulley.
• The fiberglass reinforcement provides excellent tensile strength, flexibility and high resistance to elongation.
• High precision in your belt drive.
• Improved stress distribution
• Temperature range: -25°C to +100°C
  

Standard timing belts are produced in accordance with applicable DIN and ISO standards. 
All Megadyne ISORAN RPP Silver timing belts comply with the 'REACH Directive. 

Important: These timing belts are cut to width to order and cannot be returned

Example of timing belt: 1120-SLV8-30

30 = Width in mm.
SLV 8 = Type/Tooth distance in mm.
1120 = Length in mm.

Also known by other brands:

MEGADYNE - ISORAN SILVER ® SLV8
OPTIBELT - OMEGA ® HP 8M
GATES - POWERGRIP ® GT3 8M
CONTITECH - CONTI SYNCHROFORCE ® CXP 8M