TIMING BELT 142 XL - ConCar

ConCar 142-XL timing belt - Effective length: 360.68 mm - Number of teeth: 71

ConCar timing belt in Profile "XL" is available in the following sizes:tooth widths: 6.35mm (025"), 7.94mm (031"), 9.53mm (037"), 12.7mm (050"), 19.05mm (075")

Can be purchased in other widths upon request +45 48248545 or info@fecconsult.dk

ConCar rubber timing belts have fiberglass reinforcement and are born with nylon fabric on the tooth side. The belt is endless without joints. Standard XL profile - is a timing belt with inch pitch and trapezoidal teeth. Timing belts are nowadays an important part of many machines, timing belts are primarily used for power transmission or transport. A A timing belt can best be described as a belt with integrally molded teeth on the inside, which secures the position of the timing belt in the timing pulley. By using a timing belt with an XL profile, you can build a belt drive with synchronous properties with great precision.

• High efficiency due to positive engagement between the timing belt and the timing belt pulley.
• The fiberglass reinforcement provides excellent tensile strength, flexibility and high resistance to elongation.
• High precision in your belt drive.
• Improved stress distribution
• Temperature range: -25°C to +100°C
  
  

The standard timing belts are produced in accordance with applicable DIN and ISO standards.
All PIX XL timing belts meet 'REACH Directive.

Important: These timing belts are cut to width to order and cannot be returned 

Example of timing belt: 142-XL-025

025 = "1/4" = Width in inches.
XL "1/5" = Type/Tooth spacing in mm.
360.68 = Effective length [mm]
"142" = Length [inch]

Also known by other brands:

OPTIBELT ZR XL®
MEGADYNE ISORAN XL ®
GATES ® POWERGRIP CTB XL ® 
CONTITECH ® CONTI SYNCHROBELT XL
PIX X'act ® CT - XL SECTION