AT10 - Taper-lock - 32MM
We offer clamping bushings for AT10 timing belt pulleys , so-called Taper-lock (TB) bushings, which act as a locking mechanism for fastening pulleys. AT10 timing belt pulleys with a belt width of 32 mm allow TB numbers from 1008-2517 and shaft bores from Ø9 to Ø65.
Profile: AT10, tooth division: 10mm, belt width: 32mm, number of teeth: 18-96, shaft diameters: 9-65mm, taper-lock (TB) numbers: 1008-2517, material: phosphated steel
An AT10 timing belt, which is a further development of a T10 timing belt, is unlike ordinary T-profiles, manufactured with a wider tooth profile, trapezoidal teeth and a stronger reinforcement, which ensures high power transmission, traction and accuracy in connection with positioning. An AT pulley is compatible with an AT10 timing belt in standard widths of 16 mm, 25 mm, 32 mm or 50 mm. Other widths can be manufactured on request. AT10 profiles are manufactured according to ISO 5294-1989 and are used in many different applications, including linear guidance, crane operation and transport systems. AT10 timing belt pulleys are particularly suitable for applications with many starts and stops and for transport tasks that require high positioning.
When assembling, clean the surface and place the bushing in the drive element. Loosely insert the screws into the threaded holes and place the drive element on the shaft. Tighten the screws alternately with an Allen key. After a short period of operation, check the tension.
Contact form
If you have any questions or would like a quote, please fill out our contact form. We can also be contacted by phone +45 48248545 or by email info@fecconsult.dk
