Conti SilentSync B-2660

Conti SilentSync B-2660 – self-aligning CONTI® timing belt in 14M

Conti SilentSync B-2660 is a self-aligning SilentSync timing belt from Continental, also known from the Goodyear Eagle family, and is used in belt drives where vibrations and noise must be kept down. The product has a working length of 2660mm, latitude code B and a belt width of 35mmThe belt is an endless, self-aligning SilentSync belt, where the HOT tooth shape provides a gradual tooth engagement and contributes to stable belt movement in suitable drives.

SilentSync differs from many common timing belts in that it has a self-aligning HOT tooth shape. This makes the product family particularly relevant in drives where noise, vibration and stable belt movement are of great importance. The variant's data is particularly relevant in belt drives where smooth operation, precise timing and uniform power transmission are important.

Use for this CONTI® SilentSync timing belt

SilentSync is relevant when a belt drive needs to operate more quietly than many traditional timing belt drives while maintaining precise timing. This length and width make the belt relevant for drives with larger pulleybases and higher loads, where stable engagement with the pulley is important. However, the final suitability always depends on the pulley, pulleybase, load, speed and machine design. SilentSync is suitable for horizontal drives, where the self-centering function, low noise level and low-vibration operation are relevant properties.

SilentSync may visually resemble other timing belts, but the HOT profile distinguishes it from regular HTD and standard profiles. The difference is that SilentSync uses the HOT profile, which is made for SilentSync/Eagle pulleys. Length and width therefore do not describe the entire compatibility alone. The profile must also fit the pulley, the profile has an impact on belt travel, noise level, wear and power transmission.

Technical data for this SilentSync timing belt

This variant is a 14M belt with HOT tooth shape. The length of 2660mm and the width of 35mm are key measurements for the belt geometry and its engagement with the pulley. The number of teeth is 190, calculated from the working length and tooth pitch of 14 mm. The number of teeth and tooth pitch determine the synchronous engagement of the belt in the pulley.

• Product: Conti SilentSync B-2660
• SKU: B2660
• Profile: HOT 14M
• Tooth pitch: 14 mm
• Working length / pitch length: 2660mm
• Number of teeth: 190
• Belt width: 35mm
• Color/width code: B (blue)
• Belt thickness: 9.1mm
• Tooth height: 5.30mm
• Pitch height / effective line distance: 1.40mm
• Belt type: endless, self-aligning timing belt
• Features: very quiet, low-vibration, antistatic, ozone and aging resistant
• Temperature range: depending on the application from -30 °C to +130 °C

The width code in the product name is not accidental. The SilentSync series uses letter codes, where Y, W and P belong to the 8M widths, while B, G, O and R belong to the 14M widths. This structure links letter code, length, tooth pitch and width together in the product logic of the SilentSync system.

Benefits of HOT profile and SilentSync technology

SilentSync is designed to make synchronous belt drives quieter and less vibrating. HOT stands for Helical Offset Tooth, and the tooth shape provides a smoother engagement with the pulley. When the belt and pulley are properly matched, this tooth shape can help reduce belt travel and provide smoother operation than many straight timing belt drives.

• The HOT profile is designed to reduce noise and vibrations in the belt drive.
• The belt is ozone and aging resistant.
• Limited oil resistance may be an advantage in certain technical environments, but the belt is not intended as a chemical-resistant solution.
• The temperature range is application-dependent from -30 °C to +130 °C.
• May be relevant as an alternative to chain or other belt drives when cleaner and quieter operation is desired.
• The timing belt works synchronously and helps with precise power transmission without slippage.

This does not mean that the belt alone can solve all problems in a drive. If the pulleys are worn, the shafts are misaligned, or the tension is incorrect, noise, heat, or wear can still occur. However, in a properly constructed SilentSync drive, this type of belt is a strong solution when low noise levels, precise timing, and maintenance-free operation are important factors.

Profile, length and width in this variant

The Conti SilentSync B-2660 is built around HOT 14M-profile with a tooth pitch of 14 mmThe working length is 2660mm, the belt width is 35mm, and the belt has 190 teeth. The combination of profile, tooth pitch, length and width determines how the belt engages with the associated SilentSync/Eagle pulleys.

The latitude code B (blue) is part of the SilentSync system design and links the belt width to a specific color and letter code. In a properly designed drive, the belt's HOT tooth shape works together with the pulley profile to ensure gradual and stable tooth engagement. This is especially important in synchronous belt drives where the belt must maintain a precise relationship between the motor and the driven shaft without slippage.

The endless construction provides a uniform belt without joints, and the self-guiding geometry contributes to smooth belt movement in suitable installations. The technical dimensions of the belt should therefore be seen as an overall specification: HOT 14M, 2660mm, 35mm and 190 teeth belong together in this specific variant.

Operation, noise and lifespan

SilentSync is particularly interesting in machines where noise and vibrations are important for the working environment, precision or operational reliability. The belt has very quiet and low-vibration operation, and the HOT tooth shape is central to the smooth running of the belt drive.

The service life depends on the entire belt drive. The right belt, the right pulleys, the right tension and good alignment are essential. If the belt wears out quickly, the cause should be found in the entire system: load, pulleys, tension, environment and possible contamination. Replacing the belt itself will not necessarily solve an incorrectly sized drive.

Compatibility and operating conditions

SilentSync is not an ordinary HTD belt. The belt uses the HOT tooth shape and is designed for pulleys with a corresponding SilentSync/Eagle profile. When the belt and pulley are matched, the tooth shape can contribute to lower noise, less vibration and more stable belt operation than many traditional straight timing timing belt drives.

• The HOT profile must work with pulleys that fit the SilentSync/Eagle system.
• The tooth pitch on 14 mm determines the distance between the teeth and must correspond to the profile of the pulley.
• The belt width on 35mm affects the contact surface and load capacity of the specific drive.
• The working length of 2660mm and the number of teeth on 190 defines the synchronous circumference of the belt.
• Correct alignment, appropriate belt tension and clean pulleys have a major impact on noise, heat generation and service life.
• Limited oil resistance should be understood as a technical limitation; the belt is not intended as a universal chemical-resistant solution.

If the drive is loaded incorrectly or the pulleys are worn, noise, heat, misalignment or abnormal wear can occur. These conditions are often caused by the entire belt drive setup and not just the belt itself. The SilentSync belt works best in a properly sized drive where the profile, pulleys, tension and load match.

Questions about properties and use

Why does SilentSync have color codes?

The color codes are related to the available widths. This makes it easier to identify the belt width and profile family.

What does HOT mean?

HOT stands for Helical Offset Tooth, which is central to the SilentSync belt's self-aligning and low-noise properties.

Is this belt endless?

Yes, the products in this SilentSync series are fixed length endless timing belts. They are not open meter belts.

Which pulleys should be used?

SilentSync should be used with pulleys that match the HOT profile, tooth pitch and belt width. Regular pulleys should not be assumed to fit.

Relationship between profile, length and width

The Conti SilentSync B-2660 is defined by four key goals: HOT 14M-profile, 2660mm working length, 35mm belt width and 190 teeth. This data determines the geometry of the belt and its engagement with the associated pulleys.

The letter in the name indicates the width/color code, while the number indicates the working length in millimeters. The technical structure makes it possible to distinguish between belts that are similar at first glance, but have different widths, profiles or tooth pitches. In the SilentSync system, these differences have a direct impact on operation, load and belt travel.

Brief summary

Conti SilentSync B-2660 is an endless CONTI® SilentSync timing belt with HOT 14M-profile, working length 2660mm, belt width 35mm and 190 teeth. The belt is developed for synchronous drives, where low noise levels, stable belt movement and precise power transmission are important features.

The self-aligning HOT tooth shape, the antistatic design and the maintenance-free belt construction make the variant suitable for industrial belt drives with requirements for quiet operation. The product must be used in conjunction with pulleys that match the SilentSync/Eagle profile and the specified tooth pitch.