Double PU V-belt from BEHAbelt PU 80 A (approx. 84 ° Shore A)
Made of a very elastic and flexible material PU 80 A and is particularly suitable for conveyors and vertical shafts.
Weldable V-belts made of PU and TPE are available in various hardnesses and profiles for transport and
power transmission applications. Many of our PU V-belts are food-grade and have special properties for particularly demanding applications.
Typical industries are: Food, logistics, printing & paper, packaging, building materials and much more.
| Item no. | Type | Dimensions | Weight | Roll length | Min. pulley Ø | Max load (Standard) |
Max load (Overlap) |
|
|
|
kg/100m |
|
etc
|
kg
|
kg
|
|
| FBSJ21X8OGA | PU 80A | 21x8 etc | 14,4 | 30 meters | 80 | 28,8 | 58,4 |
| FBSJ30X8OGD | PU 80A | 30x8 etc | 22,4 | 30 meters | 80 | 45,6 | 90,6 |
Step 1. Pruning
Trim the ends of the V-belt with BEHAbelt 's AS02 angle pliers before welding. To achieve the largest possible contact surface at the joint and the strongest splice, trim the ends of the V-belt at a 90 degree angle.
Step 2. fastening
The picture shows the RS02 fiction welding machine, which works by shaking the ends of the belt so that the ends melt and form a joint. It is also possible to use a paddle welding tool , e.g. BEHAbelt 's EErgo, BEHAbelt 's Multi TC or BEHAbelt 's Welding kitIf tools other than RS02 are used, it is necessary to use clamps such as FZ01 Vario or FZ02/3 to fix the belt before welding.
Step 3. welding
The RS02 friction machine generates heat through friction, which splices the ends of the belt together in seconds. This requires a temperature of 290°C when welding PU profiles and 240°C when welding TPE profiles. This video illustrates how the machine works.
Step 4. cleaning
After the ends of the V-belt have been fused together and the material has cooled down, remove any bead at the splice by using BEHAbelt SE02 edge cutter or a sharp knife.
