Ultramarine blue PU 80A V-belt (approx. 84° Shore A). Made of a slightly elastic and flexible material PU 80 A and is particularly suitable for food transport and transport with vertical shafts.
| Item no. | Type | Dimensions | Weight | Roll size | Min. pulley Ø | Fmax/belt |
|
|
|
kg/100m |
|
etc
|
kg
|
|
| FBKJ06YZLG | PU 80A | 6x4 (Y) mm | 2,3 | 100 meters | 40 | 6 |
| FBKJ08MLG | PU 80A | 8x5 (M) mm | 4,0 | 100 meters | 45 | 10 |
| FBKJ08MLG | PU 80A | 10x6 (Z) mm | 6,0 | 50 meters | 55 | 15 |
Weldable V-belts made of PU and TPE are available in various hardnesses and profiles for transport and
power transmission applications. Many of our PU V-belts are food-approved and have special properties for particularly demanding applications.
Typical industries are: Food, logistics, printing & paper, packaging, building materials and much more.
Essential characteristics:
 |
Pruning
The ends of the V-belt are cut at a 90 degree angle using BEHAbelt 's angle pliers AS02.
Step 2. get std loan
The clamps, e.g. FZ01 Vario or FZ02, are mounted on the ends of round belts to ensure correct fixation during welding.
Step 3. welding
The ends are welded together, e.g. using. BEHAbelt 's EErgo paddle welding tool or BEHAbelt 's Multi TC welding tool. TPE profiles are welded at a temperature of 240°C and PU profiles are welded at a temperature of 290°C. Clamps can be removed when the material has cooled down.
Step 4. cooling
After the ends of round belts have been fused together and the material has cooled down, remove any bead at the splice, using BEHAbelt SE02 edge cutter or sharp knife. The expected cooling time is about 5-10 minutes. Shorten any cooling time by placing the belt under cold water.
_500x500.webp)
