PU timing belt AT10 890 - Megadyne Megapower

PU timing belt AT10 890 – cast endless Megapower timing belt

PU timing belt AT10 890 - Megadyne Megapower is a PU timing belt from Megadyne Megapower with AT10 profile, 890 mm pitch length and 89 teeth. It is designed for synchronous operation, where the teeth engage the timing belt pulley and maintain the correct movement.

The tooth profile controls which type of timing pulley the belt can run on. The length and number of teeth indicate the belt's turn, while the width is adapted to the current belt routing.

Technical data for this Megapower timing belt

Here are the fixed dimensions and technical information for PU timing belt AT10 890 - Megadyne Megapower: profile, pitch length, tooth pitch, number of teeth, material and standard widths.

• Product: PU timing belt AT10 890 - Megadyne Megapower
• SKU: MP AT10-890
• Profile: AT10
• Pitch/tooth pitch: 10.0mm
• Pitch length: 890mm
• Number of teeth: 89
• Material: thermoset polyurethane, standard 88 ShA
• Steel cord: zinc-coated steel cord
• Standard widths: 10, 12, 16, 20, 25, 32, 50 and 75 mm
• Width tolerance: +/- 0.50mm
• Thickness tolerance: +/- 0.30mm
• Sleeve width tolerance: +/- 10mm
• Working temperature for standard Megapower: -25°C to +80°C
• Standard: T and AT profiles follow ISO 17396

With 89 teeth and 10.0 mm pitch, the pitch length of 890 mm matches the belt's synchronous dimensions. The pitch length describes the belt's turn along the pitch line and is the length used in conjunction with the pitch and number of teeth.

The width tolerance is +/- 0.50 mm, the thickness tolerance is +/- 0.30 mm, and the sleeve width tolerance is +/- 10 mm. The working temperature for standard Megapower is -25 °C to +80 °C.

AT10 profile and tooth pitch

With AT10 profile, the belt gets 10 mm tooth pitch in the AT series. The profile should be kept separate from T10, even though the tooth pitch is the same.

AT10 is an AT profile and should be kept separate from other profiles with the same pitch. An AT10 belt should run in timing belt pulleys where the tooth shape matches this particular profile.

Belt construction

The timing belt is made of polyurethane and has zinc-coated steel cord as reinforcement. Polyurethane provides a durable timing belt, while the steel cord helps the belt maintain a stable length during operation.

The molded endless design provides a continuous belt without joints. This is an important difference compared to open or joined belts because the belt is made as one closed length from the start.

The standard version is thermoset polyurethane, standard 88 ShA with zinc-coated steel cord. The steel cord is located inside the belt and helps to keep the pitch length stable when the belt is operating in a synchronous drive.

Operation with timing belt pulleys

In operation, the teeth work directly in the timing belt pulley. This makes the belt suitable for synchronous movements, where the shafts must follow each other with fixed timing.

The standard widths make it possible to use the same profile and length in multiple widths. This is convenient when the machine's timing belt pulleys and space requirements require a specific belt width.

For this AT10 belt, the standard widths are 10, 12, 16, 20, 25, 32, 50 and 75 mm. The width does not change the tooth profile, but it must fit the timing belt pulley, pulleybase and the space the belt has in the machine.

Frequently asked questions about the product

How many teeth does the belt have?

This Megadyne Megapower PU timing belt has 89 teeth.

What does AT10 mean?

AT10 is a metric AT profile with 10 mm tooth pitch. It is to be used with AT10 timing belt pulleys.

What does pitch length mean?

The pitch length is the length of the belt measured along the pitch line. For this belt, the pitch length is 890 mm.

Which timing pulley should the belt be used with?

The belt must be used with timing belt pulleys in AT10 profile and with a width that matches the drive.

Brief summary

PU timing belt AT10 890 - Megadyne Megapower is a cast endless PU timing belt in AT10 profile with 890 mm pitch length and 89 teeth. The belt is made of polyurethane with zinc-coated steel cord and is used for synchronous power transmission together with timing belt pulleys in the same profile.